SANDBLASTED

Pannelli per test Sabbiati

Sandblasting is a mechanical process by which the most superficial part of the material is eroded by abrasion due to a jet of shot and air. At the end of the operation the material underneath the removed layer is completely uncovered and its roughness depends on the size of the grit used and the pressure of the jet.

Available in DIFFERENT GRADES OF SANDBLASTING, GARDPANEL sandblasted panels are packaged in an inert atmosphere within 48 hours of production.

TREATMENT

SA 2.5 sandblasting type GL50 on cold rolled low carbon steel matt surface.

STANDARD MEASURES

S L H
3,0 75 150
3,0 150 200

We can supply different sizes according to specific requirements.

STANDARD LAMINATIONS CHARACTERISTICS

Rounded corners, radius 5 mm – 1 hole diameter 6 mm in the center of the short side – sandblasted SA 2.5 GL50 – packed in inert atmosphere.
We can supply different characteristics according to specific requirements.

TREATMENT

SA 2.5 sandblasting type GL50 on cold rolled low carbon steel matt surface.

STANDARD MEASURES

S L H
3,0 75 150
3,0 150 200

We can supply different sizes according to specific requirements.

STANDARD LAMINATIONS CHARACTERISTICS

Rounded corners, radius 5 mm – 1 hole diameter 6 mm in the center of the short side – sandblasted SA 2.5 GL50 – packed in inert atmosphere.
We can supply different characteristics according to specific requirements.

SCARICA LA SCHEDA TECNICA COMPLETA