GALVANIZED

Hot-dip galvanizing (HDG) is the process of coating steel obtained by immersing the material in a bath of molten zinc. This treatment is able to offer an excellent anti-corrosive and waterproof barrier (zinc patina) able to preserve the panel from rust even for several years. The zinc bath also makes the surface resistant to abrasion, as the intermetallic layers formed are harder than the base steel.
GARDPANEL galvanized sheets are available with SKINPASSED galvanization.
TREATMENT
Hot dip galvanizing on cold rolled low carbon steel, matte surface. Skinpassed surface effect: the surface is homogeneous and smooth.
STANDARD MEASURES
S | L | H |
0,8 | 75 | 150 |
0,8 | 100 | 200 |
We can supply different sizes according to specific requirements.
STANDARD LAMINATIONS FEATURES
Rounded corners, radius 5 mm – 1 hole diameter 6 mm in the center of the short side – hot-dip galvanized.
We can supply different characteristics according to specific needs.
TREATMENT
Hot dip galvanizing on cold rolled low carbon steel, matte surface. Skinpassed surface effect: the surface is homogeneous and smooth.
STANDARD MEASURES
S | L | H |
0,8 | 75 | 150 |
0,8 | 100 | 200 |
We can supply different sizes according to specific requirements.
STANDARD LAMINATIONS FEATURES
Rounded corners, radius 5 mm – 1 hole diameter 6 mm in the center of the short side – hot-dip galvanized.
We can supply different characteristics according to specific needs.
